Answer: When not using the remote control, it is recommended to hang the remote control around your neck with an anti-lost lanyard, or put it directly into the remote control charging case to avoid accidental triggering by pressing buttons when placed in a pocket.
FAQ
- Q1-1: What if the remote control is easily touched by mistake in the pocket?
- Q1-2: How to turn the hearing aid on and off? Will it automatically turn on/off when put into the charging case?
- Q1-3: How to wear the hearing aid?
- Q1-4: How to conduct hearing fitting?
- Q1-5: How to enter an existing audiogram?
- Q1-6: How to adjust the volume?
- Q1-7: How to use the remote control?
- Q1-8: How to switch scenes?
- Q1-9: What if the hearing aid is lost at home?
- Q1-10: What should I do before wearing the hearing aid?
- Q1-11: What if the hearing aid is lost outdoors?
- Q1-12: How to use the scene mode?
- Q1-13: What are the functions of the hearing aid buttons?
- Q1-14: How to turn the hearing aid on/off?
- Q1-15: What should first-time users know?
- Q1-16: Can I re-fit in the APP if my hearing changes?
- Q1-17: What do the prompt tones in the hearing aid mean?
- Q2-1: What should I do if the hearing aid cannot play music or make calls?
- Q2-2: Must the hearing aid be connected to the APP to use?
- Q2-3: What if the remote fitting interface keeps stuck and cannot perform remote fitting?
- Q2-4: Only one hearing aid can be recognized when adding devices, and both ears cannot be connected at the same time?
- Q2-5: The remote control can only control one hearing aid, and the other has no response?
- Q2-6: How to pause/play music with the hearing aid when playing music?
- Q2-7: How to answer and hang up calls with the hearing aid?
- Q2-8: How to connect the hearing aid to Auracast?
- Q2-9: What if the APP cannot be registered or logged in, and cannot receive the verification code / the verification code is invalid?
- Q2-10: What if the APP cannot be used without network?
- Q2-11: What if some mobile phone models cannot connect to the hearing aid via Bluetooth?
- Q2-12: How to download the APP?
- Q2-13: How to connect the hearing aid to the phone?
- Q2-14: How to answer calls with the hearing aid?
- Q2-15: How to listen to music with the hearing aid?
- Q2-16: How to listen to music/watch videos with the hearing aid?
- Q2-17: How to answer/make calls with the hearing aid?
- Q2-18: The phone/APP can only connect to the left or right hearing aid?
- Q2-19: What is the Bluetooth connection range?
- Q2-20: Which phones support the Flysound APP?
- Q2-21: Which phone brands support the Flysound APP?
- Q2-22: Does the hearing aid support Auracast?
- Q2-23: How to use the remote fitting function of the APP?
- Q2-24: How to restore factory settings?
- Q2-25: How to pair with a new phone?
- Q2-26: How to play or pause music and videos with the hearing aid?
- Q2-27: Phone cannot receive verification code / email shows format error?
- Q3-1: How to adjust the sound of a specific frequency band of the hearing aid separately?
- Q3-2: What if the hearing aid feels uncomfortable or does not fit the ear after wearing?
- Q3-3: How to adjust EQ for better listening experience?
- Q3-4: What if the Speech Focus effect of the hearing aid is not obvious?
- Q3-5: What if the hearing aid has loud noise?
- Q3-6: How to handle hearing aid feedback/whistling/squealing/howling?
- Q3-7: How to handle excessive hearing aid noise?
- Q3-8: The noise seems loud when wearing the hearing aid for the first time.
- Q3-9: How to choose the right earplug?
- Q3-10: Why does my own sound sound loud?
- Q3-11: Why is there a stuffy/blocked feeling in the ear when wearing the hearing aid?
- Q3-12: How to use the tinnitus management function?
- Q3-13: How to use the Speech Focus function?
- Q3-14: Can’t hear speech clearly in noisy environments?
- Q3-15: Continuous background noise/static noise after wearing?
- Q4-1: What should I do if the hearing aid sound is intermittent?
- Q4-2: After wearing for a period of time, the hearing aid volume becomes lower and unclear?
- Q4-3: What if the hearing aid still has sound, abnormal noise or feedback after being put into the charging case?
- Q4-4: What if the hearing aid suddenly has no sound, recovers after a few to ten seconds, and occurs repeatedly?
- Q4-5: What if the hearing aid gets wet?
- Q4-6: Why does the sound seem smaller?
- Q4-7: Why can’t I hear anything after wearing the hearing aid?
- Q4-8: How to replace the receiver module?
- Q4-9: How to replace if the receiver wire is too short?
- Q4-10: What if the hearing aid stops working?
- Q4-11: Why is the sound distorted/hoarse?
- Q4-12: Why is the sound distorted/hoarse?
- Q4-13: Why is there no sound (hearing aid turned on)?
- Q5-1: What if the hearing aid battery life is short or less than 12 hours?
- Q5-2: What if the left and right hearing aids have inconsistent battery levels and one drains faster?
- Q5-3: What should I do if the hearing aid cannot be charged or the charging case cannot charge the hearing aid?
- Q5-4: What if the hearing aid cannot last all day?
- Q5-5: How to charge the hearing aid when the battery is low?
- Q5-6: How to check the hearing aid battery level?
- Q5-7: How to check the charging case battery level?
- Q5-8: How long is the battery life per charge?
- Q5-9: How many times can the charging case charge the hearing aid?
- Q5-10: The charging case cannot be charged?
- Q5-11: The hearing aid cannot be charged?
- Q5-12: Do I need to replace the hearing aid battery?
- Q6-1: Where can I buy or replace wax guards and domes?
- Q6-2: Can I buy accessories such as domes, data cables, wax guards, cleaning brushes, remote controls, and anti-lost lanyards separately?
- Q6-3: How to wear the anti-lost lanyard?
- Q6-4: How to clean the hearing aid?
- Q6-5: How to replace the earplug?
- Q6-6: How to replace the wax guard?
- Q6-7: How to dry the hearing aid?
- Q6-8: How to perform daily maintenance?
- Q6-9: Where to buy accessories?
- Q6-10: Do I need a separate drying box?
- Q6-11: When should earplugs be replaced?
- Q6-12 How to clean/maintain the hearing aid?
- Q7-1: Which people and what degree of hearing loss are suitable for hearing aids?
- Q7-2: How to prevent hearing aid damage?
- Q7-3: Who is this hearing aid suitable for?
- Q7-4: Is the hearing aid waterproof?
- Q7-5: When should hearing aids not be worn?
- Q7-6: Usage precautions?
- Q7-7: Can hearing aids restore normal hearing?
- Q7-8: How to use the hearing aid safely?
- Q8-1: Does Flysound hearing aid have a 50-day trial period?
- Q8-2: How long is the warranty period of Flysound hearing aid?
- Q8-3: What is the return and exchange policy of the hearing aid?
- Q8-4: How long is the warranty period?
- Q8-5: Can the hearing aid be replaced for free?
- Q8-6: Can I pay with HSA/FSA?
- Q1-1: What if the remote control is easily touched by mistake in the pocket?
- Q1-2: How to turn the hearing aid on and off? Will it automatically turn on/off when put into the charging case?
- Q1-3: How to wear the hearing aid?
- Q1-4: How to conduct hearing fitting?
- Q1-5: How to enter an existing audiogram?
- Q1-6: How to adjust the volume?
- Q1-7: How to use the remote control?
- Q1-8: How to switch scenes?
- Q1-9: What if the hearing aid is lost at home?
- Q1-10: What should I do before wearing the hearing aid?
- Q1-11: What if the hearing aid is lost outdoors?
- Q1-12: How to use the scene mode?
- Q1-13: What are the functions of the hearing aid buttons?
- Q1-14: How to turn the hearing aid on/off?
- Q1-15: What should first-time users know?
- Q1-16: Can I re-fit in the APP if my hearing changes?
- Q1-17: What do the prompt tones in the hearing aid mean?
Q1-1: What if the remote control is easily touched by mistake in the pocket?
Q1-2: How to turn the hearing aid on and off? Will it automatically turn on/off when put into the charging case?
Answer: ▶️Video
1. Automatic on/off: Open the charging case and take out the hearing aid, the hearing aid will automatically turn on within 3-5 seconds; put the hearing aid back into the charging case, and the hearing aid will automatically turn off.
2. Manual on/off: Long press the hearing aid button for 5 seconds to manually turn on or off.
Q1-3: How to wear the hearing aid?
Answer:
1. Open the hearing aid charging case and take out the left/right hearing aid.
2. Place the hearing aid body behind the ear, then insert the earplug into the ear canal. The other hearing aid is worn in the same way.
Note: Ensure stable wearing to prevent accidental slipping during activities.
Q1-4: How to conduct hearing fitting?
Answer:
1. Open the hearing aid charging case, then open the APP, connect the hearing aid, and directly enter the hearing fitting process.
2. In the fitting interface, you will see two options: “Pure Tone Test” and “Enter Audiogram”.
3. Next, wear both hearing aids correctly, then click “Pure Tone Test” on the phone screen.
4. At this time, environmental noise will be detected. If excessive environmental noise is detected, you will be prompted to move to a quieter environment; if the environment is suitable, click “Start Fitting”.
5. Conduct pure tone tests on the left and right ears separately, and operate according to the screen prompts: click “Heard” if you hear the sound, and “Not Heard” if you don’t hear it.
6. After completing this step, you will see the hearing loss level of both ears, scroll to the bottom of the page and click “Save to Device”.
Q1-5: How to enter an existing audiogram?
Answer: First, ensure that the phone is connected to the hearing aid.
1. Open the phone APP and click “Start Fitting” on the main interface.
2. Select “Enter Audiogram”, then enter the hearing thresholds of each frequency band for the left and right ears according to the prompts.
3. After entering, scroll to the bottom and click “Write to Device”.
Q1-6: How to adjust the volume?
Answer: There are three ways to adjust the volume:
1. Via phone APP: Ensure the phone is connected to the hearing aid and fitting is completed, open the APP, you will see the volume adjustment interface on the main page, click the + or – buttons of the left/right ear to adjust.
2. Via remote control: Open the charging case, take out the remote control, press the volume button on the remote control to adjust the volume of both hearing aids at the same time.
3. Via hearing aid buttons: Short press the button on the hearing aid to adjust the volume level cyclically, each press produces a “beep” sound, the volume increases/decreases by 3dB; at maximum volume, you will hear three “beep” sounds; at minimum volume, you will hear two “beep” sounds.
Q1-7: How to use the remote control?
Answer: Open the charging case and take out the remote control. The remote control has four buttons with the following specific functions:
1. M button (mode/switch button): Press once to switch different scene modes cyclically (Smart Mode / Noisy Mode / Outdoor Mode / Indoor Mode).
2. Volume buttons: Adjust the volume of the left and right hearing aids.
3. Find button (indoor locator): When the hearing aid is lost indoors, turn off indoor lights and curtains, then press this button, the blue indicator on the hearing aid will flash for 2 minutes to help locate. This function works best at night.
Q1-8: How to switch scenes?
Answer: There are two ways to switch scenes:
1. Via phone APP: Open the APP and ensure the phone is connected to the hearing aid, click “Switch Scene” in the APP control interface.
2. Via remote control: Open the charging case, take out the remote control, press the “M” button on the top to switch scene modes.
After successfully switching the scene, the hearing aid will emit 1 to 4 “beep” sounds to indicate the mode, and the scene mode in the APP will be updated synchronously.
Q1-9: What if the hearing aid is lost at home?
Answer: When the hearing aid is accidentally lost at home, press the “Find” button on the remote control, and the blue indicator on the hearing aid will keep flashing for 2 minutes. Close the curtains and turn off all indoor lights to help quickly find the lost hearing aid. This function works best at night.
Q1-10: What should I do before wearing the hearing aid?
Answer:
1. Check battery level: Ensure the hearing aid is fully charged.
2. Clean ear canal: Gently wipe the outer ear with a cotton swab to remove earwax that may block the earplug (do not insert the cotton swab deep into the ear canal).
3. Check earplug: Check if there is any blockage in the earplug.
4. Choose quiet environment: For first-time wearers, it is recommended to conduct fitting in a quiet room for easy adaptation.
Q1-11: What if the hearing aid is lost outdoors?
Answer: Open the APP, enter “My” → “My Devices” → “Last Location” to view the last location where the hearing aid was connected to the phone, to assist in searching.
Q1-12: How to use the scene mode?
Answer: The hearing aid has 4 scene modes, as follows:
1. Smart Mode: Automatically detects the user’s environment and switches to the best listening scene.
2. Noisy Mode: Optimized for noisy environments with many people talking (such as shopping malls, restaurants, airports).
3. Outdoor Mode: Optimized for outdoor traffic environments (such as streets, squares).
4. Indoor Mode: Optimized for quiet environments (such as home, office).
Q1-13: What are the functions of the hearing aid buttons?
Answer:
1. In hearing aid mode: Short press once to increase/decrease the volume by 1 level (3dB per level).
2. When connecting to phone Bluetooth to answer calls: Short press once to answer incoming calls; long press for 2 seconds to hang up calls.
3. When connecting to phone Bluetooth to play music: Long press for 2 seconds to play/pause music playback.
4. In listening mode: Long press for 5 seconds to turn the hearing aid on or off.
Q1-14: How to turn the hearing aid on/off?
Answer:
1. Putting the hearing aid into the charging case will automatically turn off.
2. Taking the hearing aid out of the charging case will automatically turn on after 3 seconds.
3. Long press the button on the hearing aid for 3 seconds to turn the hearing aid on or off.
Q1-15: What should first-time users know?
First-time users need about a month of adaptation period.
1. Week 1: Wear for 1-2 hours a day; talk to family in a quiet environment; do housework or read.
2. Week 2: Wear for 3-4 hours a day; use when talking to friends/family in quiet environments such as communities/parks.
3. Week 3: Wear for 5-6 hours a day; try to talk in slightly noisy environments such as restaurants or supermarkets.
4. Week 4: After adapting to the above environments, you can now wear the hearing aid all day for study, communication, entertainment and daily listening activities.
Q1-16: Can I re-fit in the APP if my hearing changes?
Yes. In the APP, enter the connected hearing aid device, enter the setting interface, then click “Hearing Fitting” to re-fit your hearing.
Q1-17: What do the prompt tones in the hearing aid mean?
Volume adjustment feedback
• One short beep: Volume increased or decreased by one level.
• Two short beeps: Volume has reached the minimum level.
• Three short beeps: Volume has reached the maximum level.
Program mode switching
• One beep: Smart Scene
• Two beeps: Noisy Scene
• Three beeps: Outdoor Scene
• Four beeps: Indoor Scene
System status reminders
• One long beep: Hearing aid turned on.
• Intermittent beeps: Low battery warning.
• Specific tone sequence: Bluetooth connection or disconnection.
- Q2-1: What should I do if the hearing aid cannot play music or make calls?
- Q2-2: Must the hearing aid be connected to the APP to use?
- Q2-3: What if the remote fitting interface keeps stuck and cannot perform remote fitting?
- Q2-4: Only one hearing aid can be recognized when adding devices, and both ears cannot be connected at the same time?
- Q2-5: The remote control can only control one hearing aid, and the other has no response?
- Q2-6: How to pause/play music with the hearing aid when playing music?
- Q2-7: How to answer and hang up calls with the hearing aid?
- Q2-8: How to connect the hearing aid to Auracast?
- Q2-9: What if the APP cannot be registered or logged in, and cannot receive the verification code / the verification code is invalid?
- Q2-10: What if the APP cannot be used without network?
- Q2-11: What if some mobile phone models cannot connect to the hearing aid via Bluetooth?
- Q2-12: How to download the APP?
- Q2-13: How to connect the hearing aid to the phone?
- Q2-14: How to answer calls with the hearing aid?
- Q2-15: How to listen to music with the hearing aid?
- Q2-16: How to listen to music/watch videos with the hearing aid?
- Q2-17: How to answer/make calls with the hearing aid?
- Q2-18: The phone/APP can only connect to the left or right hearing aid?
- Q2-19: What is the Bluetooth connection range?
- Q2-20: Which phones support the Flysound APP?
- Q2-21: Which phone brands support the Flysound APP?
- Q2-22: Does the hearing aid support Auracast?
- Q2-23: How to use the remote fitting function of the APP?
- Q2-24: How to restore factory settings?
- Q2-25: How to pair with a new phone?
- Q2-26: How to play or pause music and videos with the hearing aid?
- Q2-27: Phone cannot receive verification code / email shows format error?
Q2-1: What should I do if the hearing aid cannot play music or make calls?
Solutions:
1. Put the hearing aid into the charging case. Within 5 minutes after opening the charging case, use your phone’s Bluetooth to search for the device named “hearing aid” and connect. After wearing the hearing aid, you can answer calls, play music or podcasts normally.
2. If you have previously connected the hearing aid via Bluetooth, cancel the pairing with “Hearing aid” and reconnect the hearing aid Bluetooth.
Q2-2: Must the hearing aid be connected to the APP to use?
Answer: No. If you have mild or moderate hearing loss, you can wear it directly and adjust the volume via the volume buttons to get a good effect. However, for the best listening effect, it is recommended to download the Flysound APP, enter the audiogram or complete online hearing fitting, and the hearing aid will provide precise compensation according to your hearing condition.
Q2-3: What if the remote fitting interface keeps stuck and cannot perform remote fitting?
Answer: Remote fitting requires an appointment in advance. Please contact us via the customer service email service@flysounds.com to make an appointment for fitting time. After the customer service arranges, the fitter will conduct remote fitting online for you.
Q2-4: Only one hearing aid can be recognized when adding devices, and both ears cannot be connected at the same time?
Solutions: This problem usually occurs when the left and right hearing aids lose pairing.
1. Put both hearing aids back into the charging case, ensuring the charging case battery level ≥50% (at least two LED lights on the charging case are on steadily).
2. Open and close the charging case lid quickly 5 times within 8 seconds.
3. If the 4 LED lights on the charging case flash at the same time, it means that the two ears have been re-paired successfully.
At this time, add the device through the APP again, and both hearing aids can be recognized and connected at the same time.
Q2-5: The remote control can only control one hearing aid, and the other has no response?
Solutions: This problem is also caused by the loss of pairing between the two hearing aids.
1. Put both hearing aids back into the charging case, ensuring the charging case battery level ≥50% (at least two LED lights are on).
2. Open and close the charging case lid quickly 5 times within 8 seconds.
3. If the 4 LED lights on the charging case flash at the same time, it means that the two ears have been re-paired successfully.
At this time, add the device through the APP again, and both hearing aids can be recognized and connected at the same time.
Q2-6: How to pause/play music with the hearing aid when playing music?
Answer: When the hearing aid is in music playback mode, long press the hearing aid button for 2 seconds to pause or continue playing music.
Q2-7: How to answer and hang up calls with the hearing aid?
Answer: After the hearing aid is successfully connected to the phone:
1. When there is an incoming call: Short press the hearing aid button once to answer the call.
2. During a call: Long press the hearing aid button for 2 seconds to hang up the call.
Q2-8: How to connect the hearing aid to Auracast?
Answer:
1. Open the APP and connect the hearing aid, enter the device setting interface.
2. Find the Auracast broadcast connection option and complete pairing according to the prompts to realize wireless audio transmission.
3. If the connection steps are complicated, please read the Auracast device manual carefully.
This hearing aid supports connection to Auracast devices that comply with standard Bluetooth protocols.
Q2-9: What if the APP cannot be registered or logged in, and cannot receive the verification code / the verification code is invalid?
Answer: When logging in with a mobile phone number or email, if you cannot receive the verification code or the verification code has expired, you can choose to log in without an account. There is a corresponding entrance at the bottom of the login interface, and you can use the APP functions directly without a verification code.
Q2-10: What if the APP cannot be used without network?
Answer: When the APP cannot be used in a network-free environment, you can directly adjust the volume and switch modes through the remote control or the buttons on the hearing aid body, which does not affect normal hearing aid use.
Q2-11: What if some mobile phone models cannot connect to the hearing aid via Bluetooth?
Answer: The hearing aid supports connection with mobile devices with Bluetooth 5.3 and lower versions. If the connection fails, it is recommended to try again with a mobile phone or tablet with a newer system version and ensure that the phone’s Bluetooth is turned on normally.
Q2-12: How to download the APP?
Answer:
A. For Apple users: directly open the Apple App Store, search for “Flysoundsmax” in the search bar, and click to download.
B. For Android users: search for “Flysound” in the Google Play, and click to download.
Q2-13: How to connect the hearing aid to the phone?
Answer: For first-time use, please ensure that the “Flysound Health” or “Flysound Hear” APP is installed on the phone and Bluetooth is turned on.
1. Open the charging case, take out the left/right hearing aids in sequence, tear off the protective film, then put them back into the charging case in sequence, and close the case lid to activate the hearing aids.
2. Open the phone APP, register and log in to the account according to the prompts.
3. Open the charging case, you will see the blue indicators of the left and right hearing aids flash once, indicating that they are ready for pairing.
4. In the “Add Device” interface of the logged-in APP, click “Add”, the phone will find the “Hearing aid” device via Bluetooth, click “Pair”, and after successful connection, the fitting interface will appear automatically.
Q2-14: How to answer calls with the hearing aid?
Answer: When the hearing aid is connected to the phone via Bluetooth and there is an incoming call, short press the hearing aid button to answer the call, and long press (2 seconds) to end the call.
Q2-15: How to listen to music with the hearing aid?
Answer: When the hearing aid is connected to the phone via Bluetooth, just play music on the phone, you can listen through the hearing aid, long press the button on the hearing aid for 2 seconds to pause/play music.
Q2-16: How to listen to music/watch videos with the hearing aid?
Answer: 1. Within 5 minutes after taking the hearing aid out of the charging case, turn on phone Bluetooth, find and connect to the “hearing aid” device, then play music/video on the phone, you can listen through the hearing aid. If you fail to connect to phone Bluetooth after more than 5 minutes, you cannot connect. You need to put the hearing aid back into the charging case to reconnect again.
2. If the phone has successfully connected to the hearing aid before but cannot connect now, cancel the “hearing aid” Bluetooth pairing in the phone Bluetooth, then reconnect.
Q2-17: How to answer/make calls with the hearing aid?
Answer: After wearing the hearing aid, turn on phone Bluetooth, find and connect to the “hearing aid” device; short press the hearing aid button to answer incoming calls; long press for 2 seconds to end calls.
Q2-18: The phone/APP can only connect to the left or right hearing aid?
Answer: You can troubleshoot and solve according to the following steps:
1. Check if the unconnected hearing aid has low battery; charge both hearing aids in the charging case for 2 hours, then try again.
2. Check if the charging case has low battery; put both hearing aids into the charging case, connect the charging case to power for 2 hours, then try again.
3. If both hearing aids are charged and turned on, put them into the charging case, open and close the case lid quickly 5 times within 8 seconds; after the 4 indicators of the charging case flash 5 times, the left and right hearing aids are re-paired, then reconnect via the APP.
Q2-19: What is the Bluetooth connection range?
Answer: The maximum connection range is 10 meters without obstacles between the hearing aid and the phone.
Q2-20: Which phones support the Flysound APP?
Answer: Both Apple (iOS) and Android phones can download and use the Flysound APP, and you can answer calls and play videos or music through the hearing aid.
Q2-21: Which phone brands support the Flysound APP?
Answer: The Flysound APP supports all mainstream phone brands, including Apple, Samsung, Xiaomi, Huawei, OPPO, VIVO, Google, Honor, etc.
Q2-22: Does the hearing aid support Auracast?
Answer: Flysound hearing aids support all Auracast-enabled transmitters on the market. You can connect to Auracast devices through the APP for remote wireless audio transmission in classrooms, cinemas, theaters and other environments, significantly improving speech recognition rate.
Q2-23: How to use the remote fitting function of the APP?
Remote fitting through the APP helps to achieve the best hearing aid use effect. Before use, please contact Flysound customer service email service@flysounds.com to make an appointment for remote fitting.
Q2-24: How to restore factory settings?
Open the Flysound APP and connect the hearing aid. Enter the setting interface and click “Restore Factory Settings”. The hearing aid will be reset to default settings and disconnected from the phone.
Q2-25: How to pair with a new phone?
Open the Flysound APP and connect the hearing aid. Enter the setting interface and click “Restore Factory Settings”. The hearing aid will reset and disconnect. Install the Flysound APP on the new phone and connect the hearing aid according to the pairing prompts.
Q2-26: How to play or pause music and videos with the hearing aid?
To use the hearing aid to control media playback on the phone, first ensure they are connected via the APP Bluetooth. During music or video playback, long press the function key on the hearing aid for 2 seconds to play or pause.
Q2-27: Phone cannot receive verification code / email shows format error?
1. Please check if the email is entered incorrectly, re-enter if wrong.
2. If you still cannot receive the verification code with the correct email, check the spam folder.
3. Emails with special characters such as underscores and dots, replace with an email without special symbols to log in.
4. Click “Log in without email” at the bottom of the login interface to log in directly.
- Q3-1: How to adjust the sound of a specific frequency band of the hearing aid separately?
- Q3-2: What if the hearing aid feels uncomfortable or does not fit the ear after wearing?
- Q3-3: How to adjust EQ for better listening experience?
- Q3-4: What if the Speech Focus effect of the hearing aid is not obvious?
- Q3-5: What if the hearing aid has loud noise?
- Q3-6: How to handle hearing aid feedback/whistling/squealing/howling?
- Q3-7: How to handle excessive hearing aid noise?
- Q3-8: The noise seems loud when wearing the hearing aid for the first time.
- Q3-9: How to choose the right earplug?
- Q3-10: Why does my own sound sound loud?
- Q3-11: Why is there a stuffy/blocked feeling in the ear when wearing the hearing aid?
- Q3-12: How to use the tinnitus management function?
- Q3-13: How to use the Speech Focus function?
- Q3-14: Can’t hear speech clearly in noisy environments?
- Q3-15: Continuous background noise/static noise after wearing?
Q3-1: How to adjust the sound of a specific frequency band of the hearing aid separately?
Answer:
1. First, add and connect the hearing aid in the APP, complete the hearing fitting, and the APP will provide targeted compensation according to your hearing condition.
2. If the ideal effect is still not achieved, you can separately adjust the EQ parameters of each frequency band in the device control interface of the APP.
Q3-2: What if the hearing aid feels uncomfortable or does not fit the ear after wearing?
Answer: If you feel uncomfortable or the ear canal does not fit after wearing, please contact our customer service email service@flysounds.com in time to feedback the problem, and we will provide you with suitable dome/mold replacement suggestions and follow-up solutions.
Q3-3: How to adjust EQ for better listening experience?
Answer: The hearing aid supports custom EQ adjustment, which can be fine-tuned according to the scene:
1. Excessive background noise in quiet environment: Appropriately lower the low frequency below 1000Hz.
2. Want to enhance human voice in outdoor/noisy environment: Appropriately increase the medium frequency of 1000-4000Hz.
3. Harsh sound, squeal or intermittent sound: Appropriately lower the high frequency above 4000Hz.
4. If the effect becomes worse after self-adjustment, you can reset the EQ again.
Q3-4: What if the Speech Focus effect of the hearing aid is not obvious?
Answer: The Speech Focus function only has a certain effect on enhancing human voice in noisy environments. If you feel the effect is not obvious or does not meet your needs during use, it is recommended to turn off this function directly in the APP.
Q3-5: What if the hearing aid has loud noise?
Answer: The hearing aid amplifies all external sounds, and while amplifying human voice, it will inevitably amplify environmental noise. If you feel the noise is loud, you can first lower the volume; if your average hearing loss is lower than 60dB, you can also try replacing it with a single-layer mold, which helps reduce background noise.
Q3-6: How to handle hearing aid feedback/whistling/squealing/howling?
Answer: Improper wearing when using the hearing aid for the first time may cause “feedback” (whistling), especially at maximum volume. Common causes and solutions:
1. Earwax in the ear canal: Clean the earwax first, then re-wear.
2. Poor sealing between earplug and ear canal: Re-wear correctly, gently push the earplug into the ear canal to ensure a tight fit.
3. Hearing aid not fully inserted: Insert the hearing aid completely into the ear canal, and feedback usually stops.
4. During removal: Feedback during removal of the hearing aid is normal, and feedback stops after removal.
5. Aging/damage of hearing aid: Contact after-sales service to replace the hearing aid.
6. Wrong size of earplug: Choose a double-layer dome that fits your ear canal size.
7. Using open or single-layer earplugs: Replace with double-layer earplugs to enhance sealing.
8. Excessive volume: Lower the hearing aid volume appropriately.
9. Open Flysound App, turn on phone Bluetooth to connect the hearing aid, enter the hearing aid control page, click “EQ Adjustment”, turn on EQ function, reduce the gain value of 3000Hz and above frequencies, and adjust gradually until the feedback whistling sound disappears.
Q3-7: How to handle excessive hearing aid noise?
Answer:
1. Open the APP and change the noise reduction level to “High”.
2. Lower the hearing aid volume.
3. Enable the “Speech Focus” function in the APP to suppress background noise.
Q3-8: The noise seems loud when wearing the hearing aid for the first time.
Answer: It is normal if first-time users feel loud noise and discomfort. Users with hearing loss receive less ambient noise before wearing hearing aids. After wearing, hearing aids amplify both speech and background noise at the same time. First-time users should wear hearing aids for at least 2 hours a day on average, and the brain will gradually adapt to the noise to get the best wearing experience.
Q3-9: How to choose the right earplug?
Answer:
1. If you feel the earplug is too loose or too tight after first wearing, choose other sizes from the accessories.
2. If the sound is harsh or feedback or intermittent sound occurs, it is caused by the loose fit between the dome and the ear canal, resulting in sound leakage from the ear canal. Please try other sizes of double-layer earplugs to ensure a tight fit until no feedback or intermittent sound occurs.
3. It is common to have a stuffy feeling (ear stuffiness) when first using the device. If you have mild hearing loss, it is recommended to use single-layer or open earplugs to minimize this blockage feeling; for moderate hearing loss, it is recommended to use single-layer domes to reduce stuffy feeling.
Q3-10: Why does my own sound sound loud?
Answer: It is normal to hear your own sound loudly at first, because the hearing aid amplifies both others’ and your own sound. After wearing for more than 1 week, the brain will gradually adapt. In addition, if you have mild hearing loss (within 40dB hearing loss), it is recommended to use single-layer or open earplugs; for moderate hearing loss (within 60dB hearing loss), it is recommended to use single-layer domes to reduce excessive amplification of your own sound.
Q3-11: Why is there a stuffy/blocked feeling in the ear when wearing the hearing aid?
Answer: Initial blockage feeling is common, similar to wearing in-ear headphones, caused by low-frequency sound retained in the ear canal. After wearing for more than 2 weeks, the ear will gradually adapt and this feeling will be reduced. In addition:
1. If you have mild hearing loss (within 40dB hearing loss), it is recommended to use single-layer or open earplugs; for moderate hearing loss (within 60dB hearing loss), it is recommended to use single-layer domes to reduce stuffy feeling.
2. Open Flysound App, turn on phone Bluetooth to connect the hearing aid, enter the hearing aid control page, click “EQ Adjustment”, turn on EQ function, reduce the gain value of 0Hz, 250Hz, 500Hz and lower frequency bands (set to negative numbers), and adjust gradually until the blockage feeling is eliminated (this function is only supported by Android phones).
Q3-12: How to use the tinnitus management function?
Answer: After wearing the hearing aid, open the Flysound APP, turn on phone Bluetooth, find and connect to the “hearing aid” device; in the “Tinnitus Management” section of the APP, click “Play” on the white noise option, and white noise will be played through the hearing aid to help mask tinnitus.
Q3-13: How to use the Speech Focus function?
Answer: The Speech Focus function enhances speech clarity by amplifying the sound directly in front of you while suppressing sounds from the side and rear. Just enable “Speech Focus” in the APP; to clearly hear sounds from the side or rear, disable “Speech Focus” in the APP.
Q3-14: Can’t hear speech clearly in noisy environments?
Open the APP, connect the hearing aid, and enable the “Speech Focus” function. The hearing aid will amplify the sound directly in front of you while suppressing sounds from the side and rear, thereby improving speech clarity.
Q3-15: Continuous background noise/static noise after wearing?
This is normal. The hearing aid amplifies ambient sounds while amplifying its own working current noise. It can be reduced by the following methods:
1. After connecting the hearing aid via the APP, switch scenes and set the noise reduction level to high.
2. Lower the hearing aid volume appropriately.
3. Enable EQ, set the EQ value of 0Hz–1000Hz frequency band to -5.
4. Wear continuously for 2–3 weeks to gradually adapt to the background noise.
- Q4-1: What should I do if the hearing aid sound is intermittent?
- Q4-2: After wearing for a period of time, the hearing aid volume becomes lower and unclear?
- Q4-3: What if the hearing aid still has sound, abnormal noise or feedback after being put into the charging case?
- Q4-4: What if the hearing aid suddenly has no sound, recovers after a few to ten seconds, and occurs repeatedly?
- Q4-5: What if the hearing aid gets wet?
- Q4-6: Why does the sound seem smaller?
- Q4-7: Why can’t I hear anything after wearing the hearing aid?
- Q4-8: How to replace the receiver module?
- Q4-9: How to replace if the receiver wire is too short?
- Q4-10: What if the hearing aid stops working?
- Q4-11: Why is the sound distorted/hoarse?
- Q4-12: Why is the sound distorted/hoarse?
- Q4-13: Why is there no sound (hearing aid turned on)?
Q4-1: What should I do if the hearing aid sound is intermittent?
Reason: When the hearing aid produces feedback, the feedback suppression function will cause the sound to be intermittent.
Solutions:
1. Clean the ear canal and check for earwax buildup.
2. Replace the hearing aid dome with a double-layer dome and choose the size that fits your ear canal.
3. When wearing, insert the hearing aid dome completely into the ear canal to ensure a tight fit and prevent sound leakage.
As long as the air dome fits tightly with the ear canal and no sound leaks, feedback will not occur, and the intermittent sound problem will be resolved.
Q4-2: After wearing for a period of time, the hearing aid volume becomes lower and unclear?
Solutions:
1. Adjust the volume: Increase the volume via the hearing aid buttons, remote control, or supporting APP.
2. Clean the sound outlet and wax guard: Remove the dome, check if the speaker outlet is blocked by earwax; use the included cleaning brush to clean the dome and wax guard, then use the wax guard replacement kit to replace the wax guard at the speaker outlet.
3. Re-fit hearing: Re-conduct hearing fitting through the APP to optimize listening effect.
Q4-3: What if the hearing aid still has sound, abnormal noise or feedback after being put into the charging case?
Answer: This is usually because the charging case has low power and cannot make the hearing aid turn off automatically normally.
Check the charging case indicator: If only 1 light is on or no light is on, it means the power is too low.
Solution: Connect the charging case to a USB charging cable to charge, and the hearing aid will turn off normally without feedback and abnormal noise.
Q4-4: What if the hearing aid suddenly has no sound, recovers after a few to ten seconds, and occurs repeatedly?
Answer: This situation is mainly caused by feedback from the hearing aid. Sound leaks from the ear canal and is picked up again by the hearing aid microphone, resulting in feedback. The hearing aid will automatically activate the feedback suppression function, causing the sound to disappear temporarily. Solution: Replace with a double-layer mold, choose a mold of the right size and wear it in place to ensure a tight fit between the mold and the ear canal to prevent sound leakage and avoid such problems.
Q4-5: What if the hearing aid gets wet?
Answer:
Step 1: Dry the surface moisture of the hearing aid with a towel or paper towel.
Step 2: Put the hearing aid into the charging case, connect the charging case to the charging cable, and the charging case will automatically start the drying mode after 2 hours.
If the hearing aid still does not work, keep it in the charging case to dry until the function returns to normal.
Q4-6: Why does the sound seem smaller?
Answer: You can troubleshoot and solve according to the following steps:
1. Increase the hearing aid volume.
2. Check battery level; if low, put the hearing aid into the charging case to charge.
3. Check ear canal for earwax; clean in time if necessary.
4. Check if earplug is blocked; clean earplug with cleaning brush.
5. Check if microphone hole is blocked; clean with cleaning brush.
6. Remove the hearing aid dome, check if the receiver wax guard is blocked; replace with wax guard kit.
7. Check if hearing has decreased; reopen the hearing aid in the APP, click “Settings”, then click “Hearing Fitting” to re-fit.
Q4-7: Why can’t I hear anything after wearing the hearing aid?
Answer: You can troubleshoot and solve according to the following steps:
1. Check if the battery is exhausted; put the hearing aid into the charging case to charge for 2 hours.
2. Check if the hearing aid is turned on; long press the button (3 seconds) to turn on.
3. Check if microphone hole is blocked; clean with cleaning brush.
4. Remove the hearing aid dome, check if the receiver wax guard is blocked; replace with wax guard kit.
5. Check battery level; if low, put the hearing aid into the charging case to charge.
6. Check ear canal for earwax; clean in time if necessary.
7. Check if volume is too low; increase volume appropriately.
8. Check if it is profound hearing loss; this device is not suitable for profound hearing loss.
9. Check if the hearing aid is damp/water damaged; put it into the charging case to dry for at least 4 hours.
Q4-8: How to replace the receiver module?
Answer: If the hearing aid has no sound due to dropping or receiver damage, please contact customer service WeChat or phone. Purchase a new receiver module, after receiving the receiver module, first gently pull out the old receiver module from the hearing aid, and insert the new receiver module. Note: Do not use excessive force when replacing to avoid breaking the receiver wire.
Q4-9: How to replace if the receiver wire is too short?
Answer: Please contact customer service WeChat or phone. Purchase a new receiver module, after receiving the receiver module, first gently pull out the old receiver module from the hearing aid, and insert the new receiver module. Note: Do not use excessive force when replacing to avoid breaking the receiver wire.
Q4-10: What if the hearing aid stops working?
Answer:
1. Contact your Flysound customer service for assistance.
2. Follow the troubleshooting guide in the user manual or “User Guide” in the APP.
Q4-11: Why is the sound distorted/hoarse?
Answer:
1. The receiver may be damaged: The hearing aid may have been dropped or impacted, please contact your seller or Flysound customer service.
2. The receiver may be damp or water damaged: Put the hearing aid into the charging case and charge the charging case, after about 2 hours, the charging case will dry the hearing aid, and use it after drying for 4 hours.
Q4-12: Why is the sound distorted/hoarse?
1. Receiver damage: The hearing aid may have been dropped or impacted, please contact your seller or warranty contact.
2. Damp/water damage: Put the hearing aid into the charging case and connect to the original USB cable; after about 2 hours, the drying cycle will start automatically and last for about 2 hours.
3. Improper maintenance: Please perform regular daily maintenance.
Q4-13: Why is there no sound (hearing aid turned on)?
1. Check if the volume is set to minimum.
2. Check if the earplug or microphone hole is blocked.
3. Check if it is damp/water damaged.
4. Check if it has been dropped, which may damage the receiver.
5. Contact your seller or warranty contact.
- Q5-1: What if the hearing aid battery life is short or less than 12 hours?
- Q5-2: What if the left and right hearing aids have inconsistent battery levels and one drains faster?
- Q5-3: What should I do if the hearing aid cannot be charged or the charging case cannot charge the hearing aid?
- Q5-4: What if the hearing aid cannot last all day?
- Q5-5: How to charge the hearing aid when the battery is low?
- Q5-6: How to check the hearing aid battery level?
- Q5-7: How to check the charging case battery level?
- Q5-8: How long is the battery life per charge?
- Q5-9: How many times can the charging case charge the hearing aid?
- Q5-10: The charging case cannot be charged?
- Q5-11: The hearing aid cannot be charged?
- Q5-12: Do I need to replace the hearing aid battery?
Q5-1: What if the hearing aid battery life is short or less than 12 hours?
Answer: The hearing aid lasts about 14 hours in pure hearing aid mode. If you connect to your phone’s Bluetooth to answer calls or play music, power consumption will increase, and battery life may be less than 14 hours, which is normal. To ensure all-day use, it is recommended to put the hearing aid back into the charging case to recharge when not in use or not needing to communicate. Charging for 15 minutes provides an additional 2 hours of battery life.
Q5-2: What if the left and right hearing aids have inconsistent battery levels and one drains faster?
Answer: This is normal. Hearing aid power consumption is related to many factors:
1. More severe hearing loss in one ear
2. Higher volume setting on one hearing aid
3. Usually, the side with greater hearing difficulty will have higher power consumption and faster battery drain.
Q5-3: What should I do if the hearing aid cannot be charged or the charging case cannot charge the hearing aid?
Solutions:
1. Clean charging contacts: Wipe the charging contacts of the hearing aid and charging case with a cleaning brush or clean soft cloth to check for dirt, dust or foreign objects. Dirty contacts will cause poor contact of the charging pins, resulting in failure to charge.
2. Use qualified charging cable: Please use the original USB charging cable or standard universal data cable for charging. Some laptop data cables or low-power power banks may not supply power normally. It is recommended to replace with regular charging equipment and try again.
3. Contact after-sales service: If the above methods still fail to charge, you can send an email to the customer service email to apply for return or replacement: service@flysounds.com
Q5-4: What if the hearing aid cannot last all day?
Answer: The hearing aid can provide about 14 hours of battery life in pure hearing aid mode. If you frequently connect to Bluetooth to answer calls and play music, power consumption will increase and battery life will be shortened, which is normal. It is recommended to put the hearing aid back into the charging case to recharge when not in use or not needing to communicate: charging for 15 minutes provides an additional 2 hours of battery life, easily meeting all-day use.
Q5-5: How to charge the hearing aid when the battery is low?
Answer:
1. Put the hearing aid into the charging case and close the case lid.
2. Check the charging case indicator: If the indicator does not flash or only one light flashes, it means the charging case has low power and needs to be charged via a USB cable.
Q5-6: How to check the hearing aid battery level?
Answer: There are two ways to check:
1. Put the hearing aid back into the charging case and observe the charging case indicator:
• 4 lights flashing: Battery 75%-100%
• 3 lights flashing: Battery 50%-75%
• 2 lights flashing: Battery 25%-50%
• 1 light flashing: Battery 0%-25% (needs charging)
2. Open the phone APP and connect the hearing aid, the battery level is displayed below the hearing aid image.
Q5-7: How to check the charging case battery level?
Answer: Take out all hearing aids, close the charging case, then open it again, and observe the indicator:
• 4 lights flashing: Charging case battery 75%-100%
• 3 lights flashing: Charging case battery 50%-75%
• 2 lights flashing: Charging case battery 25%-50%
• 1 light flashing: Charging case battery 0%-25%
Q5-8: How long is the battery life per charge?
Answer: After full charge, the hearing aid can be used for up to 14 hours in hearing aid mode; when using the hearing aid to listen to audio/video, the usage time can be up to 7 hours. The portable charging case can fully charge the hearing aid up to 4 times, achieving a total usage time of up to 70 hours. To meet longer usage time, it is recommended to put the hearing aid back into the charging case to charge during rest time.
Q5-9: How many times can the charging case charge the hearing aid?
Answer: The charging case can fully charge the hearing aid up to 4 times, meeting up to 70 hours of hearing aid usage time.
Q5-10: The charging case cannot be charged?
Answer: You can troubleshoot and solve according to the following steps:
1. Check if the original USB cable is used.
2. Check if the charging pins of the hearing aid charging case are in good contact with the hearing aid charging contacts.
3. Check if the hearing aid is correctly put back into the charging case.
4. Check if the hearing aid charging contacts are dirty and clean them.
Q5-11: The hearing aid cannot be charged?
Answer: You can troubleshoot and solve according to the following steps:
1. Check the charging case battery level: If only 1 indicator flashes, it means the charging case has low power and cannot charge the hearing aid, please charge the charging case first.
2. Check if the original USB cable is used.
3. Check if the charging pins of the hearing aid charging case are in good contact with the hearing aid charging contacts.
4. Check if the hearing aid is correctly put back into the charging case.
5. Check if the hearing aid charging contacts are dirty and clean them.
Q5-12: Do I need to replace the hearing aid battery?
No need to replace the battery. The hearing aid, remote control and charging case all contain rechargeable lithium batteries.
- Q6-1: Where can I buy or replace wax guards and domes?
- Q6-2: Can I buy accessories such as domes, data cables, wax guards, cleaning brushes, remote controls, and anti-lost lanyards separately?
- Q6-3: How to wear the anti-lost lanyard?
- Q6-4: How to clean the hearing aid?
- Q6-5: How to replace the earplug?
- Q6-6: How to replace the wax guard?
- Q6-7: How to dry the hearing aid?
- Q6-8: How to perform daily maintenance?
- Q6-9: Where to buy accessories?
- Q6-10: Do I need a separate drying box?
- Q6-11: When should earplugs be replaced?
- Q6-12 How to clean/maintain the hearing aid?
Q6-1: Where can I buy or replace wax guards and domes?
Answer: Available for purchase at Flysound Amazon store or Flysound official website: Website: www.flysounds.com
Q6-2: Can I buy accessories such as domes, data cables, wax guards, cleaning brushes, remote controls, and anti-lost lanyards separately?
Answer: Yes, you can buy them separately. You can purchase through the following channels:
1. Log in to Flysound Amazon official store;
2. Log in to Flysound official website (independent site): www.flysounds.com;
3. Send an email to the customer service email: service@flysounds.com to inquire about purchase.
If the dome does not fit properly:
1. You can contact the customer service email service@flysounds.com, explain your ear canal condition, and we will send you a suitable size dome for free;
2. Domes are universal specifications, you can also buy other compatible domes on Amazon by yourself.
Q6-3: How to wear the anti-lost lanyard?
Answer: There are two wearing methods: integrated and semi-hanging.
Integrated anti-lost lanyard:
1. Hang the integrated anti-lost lanyard around your neck.
2. Align the small hole at the bottom of the hearing aid with the nut on the lanyard and tighten it.
3. Buckle the remote control on the clasp of the lanyard.
Semi-hanging anti-lost lanyard:
1. Hang the lanyard around your neck.
2. Align the small hole at the bottom of the hearing aid with the nut on the lanyard and tighten it.
3. Use the clip on the lanyard to fix it on the collar at the back of the neck to prevent slipping.
Q6-4: How to clean the hearing aid?
Answer: Use the included cleaning brush to clean the earplugs and microphone area of the hearing aid. Earplugs inserted into the ear canal tend to accumulate earwax, so it is recommended to clean at least once a week to ensure the best performance of the hearing aid.
Q6-5: How to replace the earplug?
Answer: After removing the hearing aid, gently remove the original earplug; find a suitable size earplug in the accessory box, align the installation port of the new earplug with the sound hole of the hearing aid, and press gently to fix.
Q6-6: How to replace the wax guard?
Answer:
1. Take out the wax guard kit from the package, open the cover, and take out a wax guard replacement pin.
2. Remove the earplug from the hearing aid that needs to replace the wax guard.
3. Insert the hollow end of the replacement pin into the wax guard at the receiver sound outlet of the hearing aid, remove and discard the old wax guard.
4. Insert the other end of the tool (with a new wax guard) into the receiver sound outlet, push firmly to install securely, then pull out the tool, being careful not to pull out the newly installed wax guard.
5. Finally, install a suitable size earplug, and you can continue to use the hearing aid.
Q6-7: How to dry the hearing aid?
Answer:
1. Put the hearing aid into the charging case and close the case lid.
2. Connect the charging case to a USB cable to charge the charging case.
3. The charging case will fully charge the hearing aid within 2 hours, then automatically start the drying mode, and the charging case will heat and dry the hearing aid for about 2 hours.
Note: It is recommended to dry the hearing aid after daily use to maintain optimal performance and extend service life.
Q6-8: How to perform daily maintenance?
Answer:
1. Daily drying: After daily use, put the hearing aid into the charging case, close the case lid, and connect the charging case to the original USB cable; after 2 hours, the charging case will automatically dry the hearing aid.
2. Weekly cleaning: Clean the earplugs, wax guards (need to remove the hearing aid dome) and microphone holes with a cleaning brush every week to prevent earwax blockage.
3. Replace wax guards: Replace the wax guard at the speaker sound outlet with a wax guard replacement tool every three months (need to remove the hearing aid dome first) to prevent blockage of the speaker sound outlet.
Q6-9: Where to buy accessories?
Please contact our customer service WeChat or call the customer service phone.
Q6-10: Do I need a separate drying box?
No need. The charging case has a built-in drying function. Put the hearing aid into the charging case and connect to the power supply with the original USB cable. After about 2 hours, the charging case will automatically start drying for about 2 hours.
Q6-11: When should earplugs be replaced?
• Physical damage/aging: If yellowed, deformed, hardened, cracked or lacking elasticity, replace immediately to prevent sound leakage or feedback.
• Excessive accumulation: If the hearing aid wax guard is blocked by earwax/dust, affecting sound quality (muffled/distorted sound), replace in time.
Q6-12 How to clean/maintain the hearing aid?
1. After each removal, check if the earplug is blocked; clean with a clean lint-free cloth or brush.
2. Do not use cleaning agents or soap and other cleaning liquids.
3. Battery maintenance: If stored for a long time (>2 weeks), fully charge first. Store in a place away from high temperature/humidity to avoid battery damage. Charge the hearing aid once every 6 months during storage to extend battery life.
- Q7-1: Which people and what degree of hearing loss are suitable for hearing aids?
- Q7-2: How to prevent hearing aid damage?
- Q7-3: Who is this hearing aid suitable for?
- Q7-4: Is the hearing aid waterproof?
- Q7-5: When should hearing aids not be worn?
- Q7-6: Usage precautions?
- Q7-7: Can hearing aids restore normal hearing?
- Q7-8: How to use the hearing aid safely?
Q7-1: Which people and what degree of hearing loss are suitable for hearing aids?
Answer: This hearing aid is mainly suitable for people with mild and moderate hearing loss, and users with hearing loss below 80dB can use it; it is not recommended for users with profound hearing loss.
Q7-2: How to prevent hearing aid damage?
Answer: Hearing aids are precision electronic devices that need careful maintenance:
1. Keep dry; water will cause short circuit of the device.
2. Avoid dropping; may damage the receiver (speaker).
3. Avoid impact/knocking; may damage the receiver.
4. Handle gently, avoid rough operation.
5. Do not use microwave or hair dryer to dry hearing aids.
6. Put into charging case after daily use, and plug in the charging case to dry automatically.
7. Before wearing, check if there is blockage (earwax/dust) in the microphone hole and earplug and clean with a brush.
Q7-3: Who is this hearing aid suitable for?
Answer: This hearing aid is only suitable for people with mild and moderate hearing loss, not for people with profound hearing loss.
Q7-4: Is the hearing aid waterproof?
To extend service life, these hearing aids have IP68 waterproof performance. If accidentally wet, just put them into the charging case to dry or use a special hearing aid drying box, and they should return to normal function after drying.
Q7-5: When should hearing aids not be worn?
If you have the following conditions, wearing hearing aids is not recommended:
1. Congenital or traumatic ear malformation.
2. Ear discharge/purulence in the past 90 days.
3. Sudden deafness or hearing difficulty in the past 90 days.
4. Acute or chronic dizziness/vertigo.
5. Sudden hearing loss in one ear in the past 90 days.
6. Ear pain or severe discomfort.
7. Earwax blockage.
Q7-6: Usage precautions?
1. Users with severe/profound hearing loss should take a hearing test before use.
2. Moisture-proof, shock-proof, high-temperature-proof.
3. Keep the surface clean; clean earplugs and wax guards regularly.
4. Operate buttons/switches gently.
5. Use correctly worn earplugs to ensure sealing and prevent feedback.
6. Increase volume gradually; avoid sudden high volume to protect hearing.
7. Keep away from children; risk of suffocation.
8. Children or people with cognitive impairment must use under supervision.
9. Stay away from strong radiation sources (such as MRI, CT scans), as they may damage electronic devices.
10. Avoid splashing water, high temperature/humidity, direct sunlight, dusty/corrosive environments.
11. Do not soak. Remove before swimming, showering, etc. Dry ears before wearing.
12. Put into drying box/charging case every night.
13. Avoid impact, dropping, extreme high temperature.
Q7-7: Can hearing aids restore normal hearing?
Hearing aids provide assistance, they cannot restore normal hearing or cure the underlying medical causes of hearing loss. Users may need speech therapy or lip reading training. Consistent use is essential to get all benefits; infrequent use will reduce effectiveness.
Q7-8: How to use the hearing aid safely?
1. Follow instructions: Use according to the manual or customer service guidance; misuse may cause sudden/permanent damage.
2. Personalized use: Do not share hearing aids; improper fitting may cause permanent damage.
3. Suffocation risk: Keep away from children/people with cognitive impairment.
4. Cochlear Implant (CI) separation: If one ear uses CI and the other uses hearing aid, keep at least 1 cm distance between devices. The magnet/coil field of CI will permanently damage the speaker of HA. Do not store together.
5. Remove during medical procedures: Remove before X-ray, CT, MR, PET scan, diathermy or surgery; strong electromagnetic fields will cause damage.
6. Heat exposure: Do not leave hearing aids in high-temperature places such as cars under direct sunlight.
7. Safe drying only: Do not use microwave or hair dryer.
8. Avoid during water activities: Remove before swimming, bathing, showering, shaving, makeup, perfume, hair gel or sunscreen. Wear only after ears/skin are completely dry.
- Q8-1: Does Flysound hearing aid have a 50-day trial period?
- Q8-2: How long is the warranty period of Flysound hearing aid?
- Q8-3: What is the return and exchange policy of the hearing aid?
- Q8-4: How long is the warranty period?
- Q8-5: Can the hearing aid be replaced for free?
- Q8-6: Can I pay with HSA/FSA?
Q8-1: Does Flysound hearing aid have a 50-day trial period?
Answer: Yes. Hearing aids purchased on Flysound official website enjoy a 50-day free trial. (Refund and Return Policy) Official purchase link : www.flysounds.com. If you have any questions during use, you can contact the customer service email: service@flysounds.com
Q8-2: How long is the warranty period of Flysound hearing aid?
Answer: Flysound provides a 1-year official warranty for hearing aids. From the date of purchase, if there are non-human quality problems (such as unable to charge, unable to work normally, etc.), you can enjoy free replacement service. (Warranty Policy )
Q8-3: What is the return and exchange policy of the hearing aid?
1. Purchased on Amazon: Supports 30-day free return and exchange.
2. Purchased on Flysound official website: Provides 50-day free trial experience.
If you have any questions about return and exchange, you can send an email to the customer service email: service@flysounds.com.
Q8-4: How long is the warranty period?
Hearing aids, charging cases and remote controls have a one-year warranty. If the product has non-user-caused quality problems within one year, free repair is provided. (Warranty Policy )
Q8-5: Can the hearing aid be replaced for free?
If product defects are found within one month after receiving the equipment and the original packaging is intact, it can be replaced for free.
Q8-6: Can I pay with HSA/FSA?
Yes, we support HSA/FSA payment.
